ALLOYWORKS 4-Row Core Aluminum Radiator Shroud Fan - Compatible with 1955-1957 Chevy Bel Air, Nomad & Del Ray - High-Performance Cooling for Classic Car Restoration & Hot Rod Builds

But nothing serious, ill walk you through my simple set up. I use a simple toggle switch, that way you don’t have to worry about installing the temperature sensor but you can do it that way if you like.Run a wire to the battery through the firewall and to your switch. Run the blue and black wire from the harness to your fan. You will need to run the red wire to the battery as well, and pop in your inline fuse while you’re at it. I used a 25amp.The white wire which was meant to go to the temperature sensor will run to your toggle switch to complete the circuit. When you flip the switch the fan will turn on otherwise it will remain off.That’s it folks the quick and dirty way to wire the fan. Outside of that the installation is simple. Ive been running the radiator for a few months now without issue but one of the fan clips did break during install, so there is that.Until We Meet Again-Off the Grid Ken