VIVOSUN 8 Inch Grow Tent Ventilation System with Speed Controller, Carbon Filter & 25ft Ducting - Complete Air Cooling & Filtration Kit for Hydroponics, Indoor Gardening & Plant Growth Tents

I needed an inline fan to remove odor from a storage closet and provide airflow. Used this system with the filter on the intake to the inline fan, with the 4" dryer vent line running out of the closet at the top - where I installed a 4" dryer vent flapper valve horizontally. The system works well. The fan controller is variable speed. At MAX speed, you can hear it .... but it's not a distracting level, it's running smoothly, and the odor was gone from the closet (12 feet wide, 3 feet deep by 9 feet high) within an hour of turning the fan on. The fan runs on a timer and is pretty much a 'plug and play' event. Used the two included banjo clamps for the dryer vent line on the exhaust of the fan, and to secure the vent hose to the flapper valve. The filter is a SOLID piece of equipment with no compressibility - that means the hose clamp would not have secured it to the inlet to the air handler. I did NOT 'suspend' filter and air handler ... they sit on a shelf in the closet. I put a piece of duct tape around the filter to fan connection point to stop any air leaks. Supported the filter with a small piece of wood to keep it at the same level as the fan. Works great. How ever you decide to hook it up - remember there is only TWO banjo clamps provided - plan accordingly. I didn't need another one ... I hope someone sells a replacement filter cartridge for this setup.